90:. At the top of the "C," is usually a small flat edge. At the bottom is a threaded hole through which a large threaded screw protrudes. One end of this screw contains a flat edge of similar size to the one at the top of the frame, and the other end usually a small metal bar, perpendicular to the screw itself, which is used to gain leverage when tightening the clamp. When the clamp is completely closed, the flat end of the screw is in contact with the flat end on the frame. When the clamp is actually used, it is very rare that this occurs. Generally, some other object or objects will be contained between the top and bottom flat edges.
116:
clamped. This can be avoided by buffering between the clamp and the timber using two pieces of scrap wood. As each piece of scrap wood is directly in contact with the flat edges of the frame and with the items being clamped, this allows the scrap wood to receive the damage from the clamping, while dispersing the clamping force across the piece of scrap wood into the clamped objects. Deep-throated clamps are also available and provide greater reach for smaller jobs.
103:
66:
98:
A C-clamp is used by means of turning the screw through the bottom of the frame until the desired state of pressure or release is reached. In the case that the clamp is being tightened, this is when the objects being secured are satisfactorily secured between the flat end of the screw and the flat
115:
While a G-clamp is a useful tool for woodworking, special care should be taken when working with any woods. The flat gripping edges of the frame, generally no larger than half an inch or a centimeter (depending on the size of the clamp) can cause indentations and marring of the surfaces being
54:
workpiece, and often used in, but are not limited to, carpentry and welding. Often believed that these clamps are called "C" clamps because of their C-shaped frame, or also often called
62:
because including the screw part, they are shaped like an uppercase letter G. However, in fact, they were originally called a carriage maker's clamp, or
Carriage Clamp.
99:
end of the frame. If the clamp is being loosened, this is when a sufficient amount of force is released to allow the secured objects to be moved.
19:
This article is about the clamp used to hold together two workpieces. For clamps used to secure stage lighting instruments, see
200:
195:
126:
20:
8:
160:
172:
24:
189:
43:
87:
83:
141:
132:
C-clamps are frequently used to hang stage lighting instruments.
176:
79:
51:
102:
47:
65:
161:http://www.technologystudent.com/equip1/cramp1.htm
187:
173:http://www.freepatentsonline.com/5462264.html
78:C-clamps or G-clamps are typically made of
101:
64:
166:
86:, though smaller clamps may be made of
188:
154:
13:
14:
212:
119:
46:device typically used to hold a
110:
73:
1:
147:
23:. For the Chicago band, see
7:
135:
10:
217:
163:, Information on G-clamps.
18:
93:
201:Metalworking hand tools
196:Woodworking hand tools
107:
70:
105:
68:
127:C-Clamp (stagecraft)
21:C-clamp (stagecraft)
16:Type of clamp device
106:Two c-clamps in use
108:
71:
208:
180:
170:
164:
158:
216:
215:
211:
210:
209:
207:
206:
205:
186:
185:
184:
183:
171:
167:
159:
155:
150:
138:
122:
113:
96:
76:
69:An open G-clamp
28:
17:
12:
11:
5:
214:
204:
203:
198:
182:
181:
165:
152:
151:
149:
146:
145:
144:
137:
134:
121:
120:Stage Lighting
118:
112:
109:
95:
92:
75:
72:
25:C-Clamp (band)
15:
9:
6:
4:
3:
2:
213:
202:
199:
197:
194:
193:
191:
179:for C-clamps.
178:
174:
169:
162:
157:
153:
143:
140:
139:
133:
130:
129:
128:
117:
104:
100:
91:
89:
85:
81:
67:
63:
61:
57:
53:
49:
45:
42:is a type of
41:
37:
33:
26:
22:
168:
156:
131:
124:
123:
114:
97:
77:
59:
55:
39:
35:
31:
29:
111:Woodworking
74:Description
190:Categories
148:References
88:pot metal
84:cast iron
136:See also
60:G-clamps
56:C-clamps
142:F-clamp
40:G-cramp
36:G-clamp
32:C-clamp
177:Patent
94:Usage
80:steel
52:metal
44:clamp
125:see
48:wood
82:or
58:or
50:or
38:or
34:or
192::
175:,
30:A
27:.
Text is available under the Creative Commons Attribution-ShareAlike License. Additional terms may apply.