78:
62:
70:
86:
143:, split cable entry systems have been developed. The divisibility of these systems provides two advantages. The warranty on pre-terminated cables remains since the connectors don’t have to be cut and soldered again after entering the cables. The other advantage is that assembly can be done subsequently because the split cable entries are usually built around the existing lines.
98:
From the 50s on, machines and switch cabinets were more and more wired by using heavy-duty industrial connectors but the increasing cost pressure forced engineers to look for more cost-effective solutions and to decrease the risk of miswiring. In the 90s cable entry systems have been developed as an
115:
or gland plates can be used to seal the cut-outs required for passing the cables through. This protects the inside of an enclosure or machine from dirt, dust or liquids. Cable glands and self-sealing grommets are usually designed for entering single or just a few cables. By utilising a gland plate,
127:) membrane-based cable entry plates are available in the market as alternatives to hygienic stainless steel cable glands. These cable entry plates are characterised by a particularly smooth surface without dirt collecting recesses (EHEDG compliant Hygienic Design) and
158:. The grommet matching the cable diameter is placed around the cable and fixed inside the cable entry frame. Thus allowing strain relief for the cables (in some cases according to EN 62444) as well as
111:
For routing of standard cables and other electrical, pneumatic or hydraulic lines through machine, panel or enclosure walls, cable glands,
226:
181:
Since cable entry systems are utilised in many different applications, it is very important to comply with standards like e.g.
170:
Cable entries are offered in different sizes, but most of them are based on cut-out dimensions and drilling templates for
252:
128:
278:
116:
many cables with different diameters can be routed. Depending on the type, very high cable densities or
186:
175:
124:
77:
51:
61:
230:
171:
28:
140:
47:
8:
190:
46:
It is being differentiated between entry systems for routeing standard cables (without
24:
146:
Most split cable entries consist of a split hard frame, made of plastic or sometimes
50:) with a high packing density and split cable entry systems which enable routeing of
20:
123:
Even for industries with hygiene critical environments (for example, food industry,
73:
Split cable entry for multiple pre-terminated cables, up to IP 66 rated protection
147:
32:
206:
194:
69:
272:
151:
112:
55:
36:
174:(10-pin, 16-pin, 24-pin). Round cable entry plates are usually produced in
100:
134:
65:
Gland plate for cables without connectors, up to IP 68 rated protection
193:(for marine applications), national or European railway standards or
155:
106:
118:
ingress protection classes up to IP66/IP68 (according to IEC 60529)
85:
182:
159:
117:
40:
154:) and one or several split sealing grommets, usually made of
89:
Multi-layer sealing module solution for pre-terminated cables
27:
or pneumatic and hydraulic hoses into switch cabinets,
197:
that enable use in potentially explosive atmospheres.
139:
For routing cables which are already assembled with
135:
Split cable entry systems for cables with connectors
99:
alternative to heavy-duty industrial connectors and
227:"Understanding the IP (Ingress Protection) Ratings"
107:Cable entry systems for cables without connectors
270:
253:"Common Causes of a Sparking Electrical Outlet"
165:
81:Mounted cable entry on a switch cabinet wall
31:, control panels and machines or in large
84:
76:
68:
60:
39:and ships. Possible requirements can be
271:
250:
160:ingress protection of up to IP66/IP68
13:
14:
290:
183:IP rating (according to EN 60529)
244:
219:
172:standard industrial connectors
54:(with connectors) or complete
1:
212:
43:or integrated strain relief.
41:high ingress protection rates
229:. 2013-10-16. Archived from
7:
200:
10:
295:
93:
166:Frame sizes and standards
125:pharmaceutical industry
90:
82:
74:
66:
176:metric standard sizes
113:self-sealing grommets
88:
80:
72:
64:
52:pre-terminated cables
29:electrical enclosures
19:are used for routing
251:Keith (2023-09-25).
131:compliant material.
195:ATEX certifications
33:heavy-duty vehicles
25:corrugated conduits
17:Cable entry systems
279:Electrical systems
150:(e.g. utilised in
91:
83:
75:
67:
120:can be achieved.
21:electrical cables
286:
263:
262:
260:
259:
248:
242:
241:
239:
238:
223:
294:
293:
289:
288:
287:
285:
284:
283:
269:
268:
267:
266:
257:
255:
249:
245:
236:
234:
225:
224:
220:
215:
203:
168:
148:stainless steel
137:
109:
96:
56:cable harnesses
12:
11:
5:
292:
282:
281:
265:
264:
243:
217:
216:
214:
211:
210:
209:
207:Ring main unit
202:
199:
191:DNV-GL listing
187:UL recognition
167:
164:
136:
133:
108:
105:
95:
92:
9:
6:
4:
3:
2:
291:
280:
277:
276:
274:
254:
247:
233:on 2013-10-16
232:
228:
222:
218:
208:
205:
204:
198:
196:
192:
188:
184:
179:
177:
173:
163:
161:
157:
153:
152:food industry
149:
144:
142:
132:
130:
126:
121:
119:
114:
104:
102:
87:
79:
71:
63:
59:
57:
53:
49:
44:
42:
38:
37:rolling stock
34:
30:
26:
22:
18:
256:. Retrieved
246:
235:. Retrieved
231:the original
221:
180:
178:(M16 – M63)
169:
145:
138:
122:
110:
101:cable glands
97:
45:
16:
15:
258:2024-04-19
237:2024-04-19
213:References
141:connectors
48:connectors
156:elastomer
273:Category
201:See also
94:History
129:FDA
275::
189:,
185:,
162:.
103:.
58:.
35:,
23:,
261:.
240:.
Text is available under the Creative Commons Attribution-ShareAlike License. Additional terms may apply.
