73:
Sonics & Materials Inc., was a lab manager at
Branson Instruments where thin plastic films were welded into bags and tubes using ultrasonic probes. He unintentionally moved the probe close to a plastic tape dispenser and observed that the halves of the dispenser welded together. He realized that the probe did not need to be manually moved around the part, but that the ultrasonic energy could travel through and around rigid plastics and weld an entire joint. He went on to develop the first ultrasonic press. The first application of this new technology was in the toy industry.
407:, and then welded together to create an airtight seal. The main obstacle to overcome in this process is the setting of the parameters. For example, if over-welding occurs, then the concentration of plastic in the weld zone may be too low and cause the seal to break. If it is under-welded, the seal is incomplete. Variations in the thicknesses of materials can cause variations in weld quality. Some other food items sealed using ultrasonic welding include candy bar wrappers, frozen food packages and beverage containers.
91:
138:
377:
20:
268:
162:
point contact between the parts, creating a joint. Ultrasonic welding of thermoplastics causes local melting of the plastic due to absorption of vibrational energy along the joint to be welded. In metals, welding occurs due to high-pressure dispersion of surface oxides and local motion of the materials. Although there is heating, it is not enough to melt the base materials.
395:, but cannot be subjected to high temperatures. One example is a butane lighter. This container weld must be able to withstand high pressure and stress and must be airtight to contain the butane. Another example is the packaging of ammunition and propellants. These packages must be able to withstand high pressure and stress to protect the consumer from the contents.
64:. In ultrasonic welding, there are no connective bolts, nails, soldering materials, or adhesives necessary to bind the materials together. When used to join metals, the temperature stays well below the melting point of the involved materials, preventing any unwanted properties which may arise from high temperature exposure of the metal.
360:. The process can also be highly automated, provides strict control over dimensional tolerances and does not interfere with the biocompatibility of parts. Therefore, it increases part quality and decreases production costs. Items such as arterial filters, anesthesia filters, blood filters, IV catheters, dialysis tubes,
327:
For automobiles, ultrasonic welding tends to be used to assemble large plastic and electrical components such as instrument panels, door panels, lamps, air ducts, steering wheels, upholstery and engine components. As plastics have continued to replace other materials in the design and manufacture of
248:
The applications of ultrasonic welding are extensive and are found in many industries including electrical and computer, automotive and aerospace, medical, and packaging. Whether two items can be ultrasonically welded is determined by their thickness. If they are too thick this process will not join
192:
Ultrasonic welding is typically used with small parts (e.g. cell phones, consumer electronics, disposable medical tools, toys, etc.) but it can be used on parts as large as a small automotive instrument cluster. Ultrasonics can also be used to weld metals, but are typically limited to small welds of
184:
A benefit of ultrasonic welding is that there is no drying time as with conventional adhesives or solvents, so the workpieces do not need to remain in a fixture for longer than it takes for the weld to cool. The welding can easily be automated, making clean and precise joints; the site of the weld
279:
In the electrical and computer industry ultrasonic welding is often used to join wired connections and to create connections in small, delicate circuits. Junctions of wire harnesses are often joined using ultrasonic welding. Wire harnesses are large groupings of wires used to distribute electrical
439:
Sub-harmonic vibrations, which can create annoying audible noise, may be caused in larger parts near the machine due to the ultrasonic welding frequency. This noise can be damped by clamping these large parts at one or more locations. Also, high-powered welders with frequencies of 15 kHz and
161:
low-amplitude acoustic vibration is emitted. When welding plastics, the interface of the two parts is specially designed to concentrate the melting process. One of the materials usually has a spiked or rounded energy director which contacts the second plastic part. The ultrasonic energy melts the
431:
Hazards of ultrasonic welding include exposure to high temperatures and voltages. This equipment should be operated using the safety guidelines provided by the manufacturer to avoid injury. For instance, operators must never place hands or arms near the welding tip when the machine is activated.
169:
plastics, and metals. The understanding of ultrasonic welding has increased with research and testing. The invention of more sophisticated and inexpensive equipment and increased demand for plastic and electronic components has led to a growing knowledge of the fundamental process. However, many
72:
Practical application of ultrasonic welding for rigid plastics was completed in the 1960s. At this point only hard plastics could be welded. The patent for the ultrasonic method for welding rigid thermoplastic parts was awarded to Robert Soloff and
Seymour Linsley in 1965. Soloff, the founder of
300:
One of the areas in which ultrasonic welding is most used and where new research and experimentation is centered is microcircuits. This process is ideal for microcircuits since it creates reliable bonds without introducing impurities or thermal distortion into components. Semiconductor devices,
339:
is a difficult metal to weld using traditional techniques because of its high thermal conductivity. However, it is one of the easier materials to weld using ultrasonic welding because it is a softer metal and thus a solid-state weld is simple to achieve. Since aluminum is so widely used in the
398:
The food industry finds ultrasonic welding preferable to traditional joining techniques, because it is fast, sanitary and can produce hermetic seals. Milk and juice containers are examples of products often sealed using ultrasonic welding. The paper parts to be sealed are coated with plastic,
309:
are often connected by thin aluminum and gold wires using ultrasonic welding. It is also used for bonding wiring and ribbons as well as entire chips to microcircuits. An example of where microcircuits are used is in medical sensors used to monitor the human heart in bypass patients.
253:. It is fast and easily automated with weld times often below one second and there is no ventilation system required to remove heat or exhaust. This type of welding is often used to build assemblies that are too small, too complex, or too delicate for more common welding techniques.
296:
may also be assembled with ultrasonic welding. It is also often preferred in the assembly of storage media such as flash drives and computer disks because of the high volumes required. Ultrasonic welding of computer disks has been found to have cycle times of less than 300 ms.
435:
Ultrasonic welding machines require routine maintenance and inspection. Panel doors, housing covers and protective guards may need to be removed for maintenance. This should be done when the power to the equipment is off and only by the trained professional servicing the machine.
364:, cardiometry reservoirs, blood/gas filters, face masks and IV spike/filters can all be made using ultrasonic welding. Another important application in the medical industry for ultrasonic welding is textiles. Items like hospital gowns, sterile garments, masks,
313:
One difference between ultrasonic welding and traditional welding is the ability of ultrasonic welding to join dissimilar materials. The assembly of battery components is a good example of where this ability is utilized. When creating battery and
249:
them. This is the main obstacle in the welding of metals. However, wires, microcircuit connections, sheet metal, foils, ribbons and meshes are often joined using ultrasonic welding. Ultrasonic welding is a very popular technique for bonding
318:
components, thin gauge copper, nickel and aluminium connections, foil layers and metal meshes are often ultrasonically welded together. Multiple layers of foil or mesh can often be applied in a single weld eliminating steps and costs.
185:
is very clean and rarely requires any touch-up work. The low thermal impact on the materials involved enables a greater number of materials to be welded together. The process is a good automated alternative to glue, screws or
332:, low capital costs, and flexibility. Ultrasonic welding does not damage surface finish because the high-frequency vibrations prevent marks from being generated, which is a crucial consideration for many car manufacturers, .
432:
Also, operators should be provided with hearing protection and safety glasses. Operators should be informed of government agency regulations for the ultrasonic welding equipment and these regulations should be enforced.
193:
thin, malleable metals such as aluminum, copper, and nickel. Ultrasonics would not be used in welding the chassis of an automobile or in welding pieces of a bicycle together, due to the power levels required.
76:
The first car made entirely out of plastic was assembled using ultrasonic welding in 1969. The automotive industry has used it regularly since the 1980s, and it is now used for a multitude of applications.
423:
for the US Army's Close Combat
Assault Ration project without the use of binders. Dried food is pressed into a mold and welded for an hour, during which food particles become stuck together.
218:, an optional booster and a Horn. All three elements of the stack are specifically tuned to resonate at the same exact ultrasonic frequency (Typically 15, 20, 30, 35 or 40 kHz)
524:
Mostafavi, Shimaalsadat; Hesser, Daniel Frank; Markert, Bernd (December 2018). "Effect of process parameters on the interface temperature in ultrasonic aluminum wire bonding".
356:
In the medical industry ultrasonic welding is often used because it does not introduce contaminants or degradation into the weld and the machines can be specialized for use in
440:
20 kHz typically emit a potentially damaging high-pitched squeal in the range of human hearing. Shielding this radiating sound can be done using an acoustic enclosure.
328:
automobiles, the assembly and joining of plastic components has increasingly become a critical issue. Some of the advantages for ultrasonic welding are low cycle times,
149:
parts, ultrasonic welding equipment can be customized to fit the exact specifications of the parts being welded. The parts are sandwiched between a fixed shaped nest (
384:
Ultrasonic welding is often used in packaging applications. Many common items are either created or packaged using ultrasonic welding. Sealing containers, tubes and
391:
Ultrasonic welding is also applied in the packaging of dangerous materials, such as explosives, fireworks and other reactive chemicals. These items tend to require
368:
and textiles for clean rooms can be sealed and sewn using ultrasonic welding. This prevents contamination and dust production and reduces the risk of infection.
173:
Scientists from the
Institute of Materials Science and Engineering (WKK) of University of Kaiserslautern, with the support from the German Research Foundation (
1071:
510:
990:
1033:
748:
227:
Horn: Takes the shape of the part, also modifies the amplitude mechanically and applies the mechanical vibration to the parts to be welded.
335:
Ultrasonic welding is generally utilized in the aerospace industry when joining thin sheet gauge metals and other lightweight materials.
224:
Booster: Modifies the amplitude of the vibration mechanically. It is also used in standard systems to clamp the stack in the press.
627:
Materialwissenschaft und
Werkstofftechnik: Entwicklung, Fertigung, PrĂĽfung, Eigenschaften und Anwendungen Technischer Werkstoffe
208:
A nest or anvil or fixture where the parts are placed and allowing the high frequency vibration to be directed to the interfaces
1064:
177:), have succeeded in proving that using ultrasonic welding processes can lead to highly durable bonds between light metals and
981:
232:
An electronic ultrasonic generator (US: Power supply) delivering a high power electric signal with frequency matching the
170:
aspects of ultrasonic welding still require more study, such as the relationship of weld quality to process parameters.
596:
344:, ultrasonic welding is becoming even more prevalent. It has been used in the bonding of the popular composite material
746:
Harras, B; Cole, K C; Vu-Khanh, T (February 1996). "Optimization of the
Ultrasonic Welding of PEEK-Carbon Composites".
1057:
1026:
963:
948:
933:
918:
903:
340:
aerospace industry, it follows that ultrasonic welding is an important manufacturing process. With the advent of new
348:. Numerous studies have been done to find the optimum parameters that will produce quality welds for this material.
833:
475:"Microstructure and lap shear strength of the weld interface in ultrasonic welding of Al alloy to stainless steel"
178:
174:
1384:
1209:
1019:
474:
1154:
1131:
1008:. (Topeka, KS: Peterson Publications, Inc.). Section: Assembly: pages 36–39, covers Crawford's article.
987:
1146:
563:"Close up on technology: Top 50 Update Who Was First In Hot Runners, Ultrasonic Welding, & PET?"
1389:
1121:
108:
be customized is presented as though an advantage, but later text seems to indicate that equipment
472:
1348:
1096:
622:
221:
Converter: Converts the electrical signal into a mechanical vibration using piezo electric effect
117:
1005:
1204:
1111:
48:
are locally applied to work pieces being held together under pressure to create a solid-state
1189:
1184:
1159:
1136:
1116:
504:
239:
A controller controlling the movement of the press and the delivery of the ultrasonic energy.
1255:
1199:
112:
be customized for each assembly, which is a disadvantage in general as it prevents re-use.
8:
1374:
1164:
449:
205:
A press, usually with a pneumatic or electric drive, to assemble two parts under pressure
1281:
1194:
1169:
1126:
1101:
765:
642:
541:
341:
35:
1323:
1318:
1001:
977:
959:
944:
929:
914:
899:
769:
646:
545:
490:
416:
365:
61:
473:
Hiromichi T. Fujii, Yuta Goto, Yutaka S. Sato, and
Hiroyuki Kokawa (February 2016).
1379:
1179:
1080:
757:
634:
533:
486:
623:"Ultrasonic spot welding of aluminum sheet/carbon fiber reinforced polymer–joints"
562:
1291:
994:
537:
420:
166:
1286:
1250:
761:
281:
271:
The thin aluminium wires around the edges of the Intel C8751H silicon die were
1368:
1265:
1260:
1224:
1174:
1106:
400:
392:
250:
212:
146:
137:
1245:
1214:
1042:
638:
404:
385:
345:
272:
262:
376:
1296:
1088:
289:
939:
Grewell, David A.; Benatar, Avraham; & Park, Joon B. (Eds), (2003).
201:
All ultrasonic welding systems are composed of the same basic elements:
165:
Ultrasonic welding can be used for both hard and soft plastics, such as
1343:
1338:
357:
329:
302:
285:
215:
39:
976:
Tres, Paul A., "Designing
Plastic Parts for Assembly", 6th ed., 2006,
1333:
1328:
1240:
315:
293:
233:
158:
154:
45:
42:
24:
19:
336:
186:
53:
1353:
1313:
694:
692:
361:
49:
1011:
415:"Sonic agglomeration", a combination of ultrasonic welding and
267:
57:
689:
306:
150:
943:. Cincinnati, Ohio: Hanser Gardner Publications, Inc.
523:
322:
256:
988:"Port Sealing: An Effective Heat Sealing Solution".
795:
The
Welding Institute, Ultrasonic Welding Technique
834:"Cooking (and Shrinking) the Modern Combat Ration"
745:
620:
1366:
911:Welding Handbook: Welding Science and Technology
855:Welding Handbook: Welding Science and Technology
621:Balle, F; Wagner, G; Eifler, D (November 2007).
956:Handbook of Plastics Joining: A Practical Guide
806:Handbook of Plastics Joining: A Practical Guide
784:Handbook of Plastics Joining: A Practical Guide
716:Handbook of Plastics Joining: A Practical Guide
211:An ultrasonic stack composed of a converter or
23:Ultrasonic welding of thin metallic foils. The
958:. Norwich, New York: Plastics Design Library.
157:(horn) connected to a transducer, and a ~20-70
104:on Customisability advantage; that equipment
1065:
1027:
818:
816:
814:
749:Journal of Reinforced Plastics and Composites
597:"Welding Still Ensures High-Strength Joints"
509:: CS1 maint: multiple names: authors list (
878:
876:
1072:
1058:
1034:
1020:
811:
660:
658:
656:
849:
847:
941:Plastics and Composites Welding Handbook
873:
375:
266:
136:
90:
60:, and especially for joining dissimilar
18:
653:
1367:
928:. Boca Raton, Florida: CRC Press LLC.
844:
710:
708:
557:
555:
1053:
1015:
594:
371:
145:For joining complex injection molded
926:New Developments in Advanced Welding
831:
590:
588:
586:
584:
84:
705:
552:
351:
323:Aerospace and automotive industries
13:
970:
595:Weber, Austin (30 November 2007).
526:Journal of Manufacturing Processes
257:Computer and electrical industries
14:
1401:
1000:. January/February 2013 Edition.
909:American Welding Society (2001).
894:American Welding Society (1997).
581:
1041:
954:Plastics Design Library (1997).
896:Jefferson’s Welding Encyclopedia
868:Jefferson's Welding Encyclopedia
700:Jefferson's Welding Encyclopedia
675:Jefferson's Welding Encyclopedia
491:10.1016/j.scriptamat.2016.02.004
89:
1132:Shielded metal (Stick/MMA/SMAW)
1122:Gas tungsten (Heliarc/TIG/GTAW)
888:
860:
825:
798:
789:
776:
739:
730:
721:
410:
243:
179:carbon-fiber-reinforced polymer
175:Deutsche Forschungsgemeinschaft
27:is rotated along the weld seam.
1117:Gas metal (Microwire/MIG/GMAW)
680:
667:
614:
517:
466:
1:
832:Kord, Tyler (June 29, 2019).
455:
419:, is used to produce compact
196:
1097:Atomic hydrogen (Athydo/AHW)
924:Ahmed, Nasir (Ed.), (2005).
913:. American Welding Society.
898:. American Welding Society.
538:10.1016/j.jmapro.2018.09.020
100:appears to contradict itself
7:
1079:
998:Plastic Decorating Magazine
443:
10:
1406:
866:American Welding Society,
853:American Welding Society,
762:10.1177/073168449601500203
698:American Welding Society,
673:American Welding Society,
260:
80:
67:
52:. It is commonly used for
1309:
1274:
1233:
1155:Electric resistance (ERW)
1145:
1087:
1049:
804:Plastics Design Library,
782:Plastics Design Library,
714:Plastics Design Library,
426:
388:are common applications.
460:
236:frequency of the stack.
38:whereby high-frequency
639:10.1002/mawe.200700212
381:
276:
142:
28:
1349:Tools and terminology
485:. ELSEVIER: 135–138.
379:
270:
140:
120:for more information.
22:
1385:Packaging machinery
1185:Friction stir (FSW)
1160:Electron-beam (EBW)
567:Plastics Technology
450:Thermosonic bonding
366:transdermal patches
342:composite materials
280:signals and power.
1282:Heat-affected zone
1210:Oxyacetylene (OAW)
993:2018-05-15 at the
479:Scripta Materialia
382:
372:Packaging industry
277:
143:
141:Ultrasonic Welding
36:industrial process
32:Ultrasonic welding
29:
1362:
1361:
1305:
1304:
1165:Electroslag (ESW)
1112:Flux-cored (FCAW)
986:Crawford, Lance,
982:978-1-5699-0401-5
601:Assembly Magazine
569:. 1 December 2005
135:
134:
1397:
1195:Laser beam (LBW)
1102:Electrogas (EGW)
1074:
1067:
1060:
1051:
1050:
1036:
1029:
1022:
1013:
1012:
883:
880:
871:
864:
858:
851:
842:
841:
829:
823:
822:Grewell, p. 171.
820:
809:
802:
796:
793:
787:
780:
774:
773:
743:
737:
734:
728:
727:Grewell, p. 141.
725:
719:
712:
703:
696:
687:
686:Grewell, p. 169.
684:
678:
671:
665:
662:
651:
650:
618:
612:
611:
609:
607:
592:
579:
578:
576:
574:
559:
550:
549:
521:
515:
514:
508:
500:
498:
497:
470:
421:food ration bars
393:hermetic sealing
352:Medical industry
130:
127:
121:
93:
92:
85:
1405:
1404:
1400:
1399:
1398:
1396:
1395:
1394:
1390:Plastic welding
1365:
1364:
1363:
1358:
1301:
1292:Residual stress
1270:
1229:
1147:Other processes
1141:
1137:Submerged (SAW)
1083:
1078:
1045:
1040:
995:Wayback Machine
973:
971:Further reading
891:
886:
881:
874:
865:
861:
852:
845:
830:
826:
821:
812:
803:
799:
794:
790:
781:
777:
744:
740:
735:
731:
726:
722:
713:
706:
697:
690:
685:
681:
672:
668:
663:
654:
633:(11): 934–938.
619:
615:
605:
603:
593:
582:
572:
570:
561:
560:
553:
522:
518:
502:
501:
495:
493:
471:
467:
463:
458:
446:
429:
413:
374:
354:
325:
282:Electric motors
265:
259:
246:
199:
181:(CFRP) sheets.
167:semicrystalline
131:
125:
122:
116:Please see the
115:
94:
83:
70:
17:
16:Welding process
12:
11:
5:
1403:
1393:
1392:
1387:
1382:
1377:
1360:
1359:
1357:
1356:
1351:
1346:
1341:
1336:
1331:
1326:
1321:
1316:
1310:
1307:
1306:
1303:
1302:
1300:
1299:
1294:
1289:
1287:Photokeratitis
1284:
1278:
1276:
1272:
1271:
1269:
1268:
1263:
1258:
1253:
1248:
1243:
1237:
1235:
1231:
1230:
1228:
1227:
1222:
1217:
1212:
1207:
1205:Magnetic pulse
1202:
1197:
1192:
1187:
1182:
1177:
1172:
1167:
1162:
1157:
1151:
1149:
1143:
1142:
1140:
1139:
1134:
1129:
1124:
1119:
1114:
1109:
1104:
1099:
1093:
1091:
1085:
1084:
1077:
1076:
1069:
1062:
1054:
1047:
1046:
1039:
1038:
1031:
1024:
1016:
1010:
1009:
984:
972:
969:
968:
967:
952:
937:
922:
907:
890:
887:
885:
884:
882:Ahmed, p. 266.
872:
859:
843:
824:
810:
797:
788:
775:
756:(2): 174–182.
738:
736:Ahmed, p. 251.
729:
720:
704:
688:
679:
666:
664:Ahmed, p. 260.
652:
613:
580:
551:
516:
464:
462:
459:
457:
454:
453:
452:
445:
442:
428:
425:
412:
409:
380:Butane lighter
373:
370:
353:
350:
324:
321:
275:by ultrasound.
261:Main article:
258:
255:
251:thermoplastics
245:
242:
241:
240:
237:
230:
229:
228:
225:
222:
209:
206:
198:
195:
133:
132:
97:
95:
88:
82:
79:
69:
66:
15:
9:
6:
4:
3:
2:
1402:
1391:
1388:
1386:
1383:
1381:
1378:
1376:
1373:
1372:
1370:
1355:
1352:
1350:
1347:
1345:
1342:
1340:
1337:
1335:
1332:
1330:
1327:
1325:
1322:
1320:
1317:
1315:
1312:
1311:
1308:
1298:
1295:
1293:
1290:
1288:
1285:
1283:
1280:
1279:
1277:
1275:Related terms
1273:
1267:
1266:Shielding gas
1264:
1262:
1259:
1257:
1254:
1252:
1249:
1247:
1244:
1242:
1239:
1238:
1236:
1232:
1226:
1223:
1221:
1218:
1216:
1213:
1211:
1208:
1206:
1203:
1201:
1198:
1196:
1193:
1191:
1190:Friction stud
1188:
1186:
1183:
1181:
1178:
1176:
1173:
1171:
1168:
1166:
1163:
1161:
1158:
1156:
1153:
1152:
1150:
1148:
1144:
1138:
1135:
1133:
1130:
1128:
1125:
1123:
1120:
1118:
1115:
1113:
1110:
1108:
1105:
1103:
1100:
1098:
1095:
1094:
1092:
1090:
1086:
1082:
1075:
1070:
1068:
1063:
1061:
1056:
1055:
1052:
1048:
1044:
1037:
1032:
1030:
1025:
1023:
1018:
1017:
1014:
1007:
1003:
999:
996:
992:
989:
985:
983:
979:
975:
974:
965:
964:1-884207-17-0
961:
957:
953:
950:
949:1-56990-313-1
946:
942:
938:
935:
934:0-8493-3469-1
931:
927:
923:
920:
919:0-87171-657-7
916:
912:
908:
905:
904:0-87171-506-6
901:
897:
893:
892:
879:
877:
869:
863:
856:
850:
848:
839:
838:www.yahoo.com
835:
828:
819:
817:
815:
807:
801:
792:
785:
779:
771:
767:
763:
759:
755:
751:
750:
742:
733:
724:
717:
711:
709:
701:
695:
693:
683:
676:
670:
661:
659:
657:
648:
644:
640:
636:
632:
628:
624:
617:
602:
598:
591:
589:
587:
585:
568:
564:
558:
556:
547:
543:
539:
535:
531:
527:
520:
512:
506:
492:
488:
484:
480:
476:
469:
465:
451:
448:
447:
441:
437:
433:
424:
422:
418:
408:
406:
402:
401:polypropylene
396:
394:
389:
387:
386:blister packs
378:
369:
367:
363:
359:
349:
347:
343:
338:
333:
331:
320:
317:
311:
308:
304:
298:
295:
291:
287:
283:
274:
269:
264:
254:
252:
238:
235:
231:
226:
223:
220:
219:
217:
214:
213:piezoelectric
210:
207:
204:
203:
202:
194:
190:
188:
182:
180:
176:
171:
168:
163:
160:
156:
152:
148:
147:thermoplastic
139:
129:
126:December 2023
119:
113:
111:
107:
101:
98:This section
96:
87:
86:
78:
74:
65:
63:
59:
55:
51:
47:
44:
41:
37:
33:
26:
21:
1256:Power supply
1246:Filler metal
1219:
1200:Laser-hybrid
1127:Plasma (PAW)
1043:Metalworking
997:
955:
940:
925:
910:
895:
889:Bibliography
867:
862:
854:
837:
827:
805:
800:
791:
783:
778:
753:
747:
741:
732:
723:
715:
699:
682:
674:
669:
630:
626:
616:
604:. Retrieved
600:
571:. Retrieved
566:
529:
525:
519:
505:cite journal
494:. Retrieved
482:
478:
468:
438:
434:
430:
414:
411:Experimental
405:polyethylene
397:
390:
383:
355:
346:carbon fiber
334:
326:
312:
299:
290:transformers
278:
263:Wire bonding
247:
244:Applications
200:
191:
183:
172:
164:
144:
123:
109:
105:
103:
99:
75:
71:
31:
30:
1319:Fabrication
1297:Weldability
1089:Arc welding
606:13 November
573:13 November
532:: 104–114.
358:clean rooms
303:transistors
286:field coils
273:wire bonded
1375:Ultrasound
1369:Categories
1339:Metallurgy
1220:Ultrasonic
1215:Spot (RSW)
1170:Exothermic
496:2017-07-04
456:References
399:generally
330:automation
294:capacitors
216:transducer
197:Components
189:designs.
46:vibrations
40:ultrasonic
1334:Machining
1329:Jewellery
1241:Electrode
1234:Equipment
1006:1536-9870
870:, p. 572.
857:, p. 750.
770:137009954
702:, p. 570.
677:, p. 571.
647:136559923
546:139828540
316:fuel cell
234:resonance
155:sonotrode
118:talk page
62:materials
25:sonotrode
1344:Smithing
1180:Friction
991:Archived
808:, p. 57.
786:, p. 54.
718:, p. 56.
444:See also
362:pipettes
337:Aluminum
187:snap-fit
153:) and a
54:plastics
43:acoustic
1380:Welding
1354:Welding
1324:Forming
1314:Casting
1081:Welding
417:molding
81:Process
68:History
1251:Helmet
1004:
980:
962:
947:
932:
917:
902:
768:
645:
544:
427:Safety
307:diodes
102:
58:metals
34:is an
1261:Robot
1225:Upset
1175:Forge
1107:Flash
766:S2CID
643:S2CID
542:S2CID
461:Notes
151:anvil
1002:ISSN
978:ISBN
960:ISBN
945:ISBN
930:ISBN
915:ISBN
900:ISBN
608:2020
575:2020
511:link
305:and
292:and
110:must
56:and
50:weld
758:doi
635:doi
534:doi
487:doi
483:116
403:or
159:kHz
106:can
1371::
875:^
846:^
836:.
813:^
764:.
754:15
752:.
707:^
691:^
655:^
641:.
631:38
629:.
625:.
599:.
583:^
565:.
554:^
540:.
530:36
528:.
507:}}
503:{{
481:.
477:.
288:,
284:,
1073:e
1066:t
1059:v
1035:e
1028:t
1021:v
966:.
951:.
936:.
921:.
906:.
840:.
772:.
760::
649:.
637::
610:.
577:.
548:.
536::
513:)
499:.
489::
128:)
124:(
114:.
Text is available under the Creative Commons Attribution-ShareAlike License. Additional terms may apply.