229:. The wood used to make the fretboard will usually differ from the wood in the rest of the neck. The bending stress on the neck is considerable, particularly when heavier gauge strings are used, and the ability of the neck to resist bending is important to the guitar's ability to hold a constant pitch during tuning or when strings are fretted. The rigidity of the neck with respect to the body of the guitar is one determinant of an instrument's quality. Conversely, the ability to change the pitch of the note slightly by deliberately bending the neck forcibly with the fretting arm is a technique occasionally used, particularly in the
174:
36:
167:
198:
276:
slightly more pronounced on the lower strings, especially when meant for gut or synthetic strings. Many authentic old instruments have had their necks reset to a slightly increased angle, and lengthened by about a centimeter. The neck graft allows the original scroll to be kept with a
Baroque violin when bringing its neck to conformance with modern standards.
257:
While it may be perceived that position markers are featured on popular instruments to accommodate their typically lesser-educated users (in contrast to classical instruments), on the contrary, for the above reasons, position markers are of much help to electric guitarists of any level of competence.
244:
where the player can easily see which fret they are on. Sometimes the dots are replaced with bars, the octave positions having a wider bar. Classical guitars almost never feature position markers, especially on the fretboard's face, whereas electric guitars usually do. This is due to several factors:
243:
on the face of the fretboard of modern guitars are usually placed at frets 3, 5, 7, 9, 12 (double dot to indicate the octave), 15, 17, 19, 21, 24 (double dot to indicate the second octave). It's also common that there are marker dots on the "upper" side of the neck, near the edge of the fretboard,
253:
3) Electric guitars vary greatly in terms of scale length, depth of lower and – if present – upper rout and where these connect to the neck at its heel, and number of frets (usually between 21 and 24). In contrast, classical guitar dimensions are standardised, with the 12th fret aligning with the
323:
joint, which is similar to a dovetail joint, except that the tenon is straight instead of tapered. Sometimes these joints are reinforced with screws, nails or pins. Since this joint is inherently weaker than a dovetail joint, it is usually only found on violins and similar instruments with less
275:
The neck of a violin is usually maple with a flamed figure compatible with that of the ribs and back. The shape of the neck and fingerboard effect how easily the violin may be played. Fingerboards are dressed to a particular transverse curve, and have a small lengthwise "scoop," or concavity,
237:. The shape of the neck's cross-section can also vary from a gentle curve to a more pronounced "V" shape. (On steel string guitars, the fretboard is typically gently rounded across its width. On classical guitars, the playing surface of the fretboard is generally flat.)
327:
With a neck that ends in a "foot" that is glued to the instrument body proper. This method is mostly used in building classical and flamenco guitars. The "foot" is on the bottom of the neck, and affords a large gluing surface to the back of the
350:
Its repairability: While the latter two methods (using a "foot" and laminating the neck into the instrument) create very strong joints, they are not very repairable, and require tearing the instrument apart if repairs are
296:
The method of connecting the neck to the body of the instrument varies according to the instrument. This ranges from necks that are simply screwed onto the body of the instrument (such as in electric guitars like the
186:
266:
Steel guitars often have multiple necks and were among the first multi-neck instruments; each neck is tuned differently to afford more chord voicings. in the 1940s, lap steel guitars had up to four necks.
314:, where the dovetail is cut into the end of the neck assembly and fits into a mating mortise in the instrument's endblock. This is typically used on acoustic and hollow-body electric guitars.
335:, making the neck part of the body. This method is used on some solid-body electric guitars, where the piece of wood that is the neck runs the entire length of the instrument and is
247:
1) Electric guitars do not rely on a resonating body chamber to produce sound and therefore the inert bodywood may be carved more deeply to allow better access to higher frets.
525:
360:
A profile is the shape of the neck's cross-section. A variety of shapes are used and the choice is a matter of personal taste and preference.
449:
589:
532:
594:
405:
250:
2) Electric guitars also sport an extended high-end range, due to the above reason. Typically, up to 24 frets are used.
483:
79:
61:
284:
The neck of a lute is made of light wood, with a veneer of hardwood (usually ebony) to provide durability for the
563:
46:
17:
146:
The word for neck also sometimes appears in other languages in musical instructions. The terms include
57:
518:
185:
501:
8:
298:
136:
135:
are examples of instruments which have necks. Necks are also an integral part of certain
104:
395:
53:
504:– Step by step instructions for the construction of the acoustic guitar neck, on the
479:
422:
401:
319:
304:
There are basically four ways of attaching the neck to the body using glued joints:
568:
202:
132:
510:
310:
240:
583:
234:
128:
553:
369:
332:
218:
178:
393:
558:
542:
374:
285:
111:, where the fingers are placed to stop the strings at different pitches.
108:
93:
254:
neck-end of the body, use of only 19 frets, and scale length of 25.6".
336:
226:
222:
214:
140:
173:
64:. Statements consisting only of original research should be removed.
120:
505:
343:
The two factors in deciding what type of neck joint to use are:
450:"Pedal to the Metal: A Short History of the Pedal Steel Guitar"
197:
190:
112:
339:
to the rest of the body. This makes an extremely strong joint.
166:
230:
116:
210:
124:
107:
that projects from the main body and is the base of the
291:
540:
397:Mottola's Cyclopedic Dictionary of Lutherie Terms
581:
473:
526:
506:Liutaio Mottola Lutherie Information Website
441:
209:The neck of a guitar includes the guitar's
533:
519:
233:genre and those derived from it, such as
80:Learn how and when to remove this message
201:Neck joint with a four-screw plate on a
196:
184:
172:
502:Carving the Neck for the Flattop Guitar
14:
582:
414:
514:
447:
301:) to various types of glued joints.
29:
448:Ross, Michael (February 17, 2015).
423:"Early History of the Steel Guitar"
420:
24:
400:. LiutaioMottola.com. p. 35.
165:
25:
606:
495:
394:Mottola, R.M. (1 January 2020).
292:Attachment in string instruments
34:
347:Its general joint strength; and
261:
590:String instrument construction
467:
387:
13:
1:
380:
189:Neck-through construction on
595:Guitar parts and accessories
7:
363:
60:the claims made and adding
10:
611:
355:
91:
549:
270:
161:
139:instruments, such as the
478:, Springer, p. 45,
92:Not to be confused with
474:Richard French (2008),
454:Premier Guitar Magazine
279:
177:Double truss rod neck,
103:is the part of certain
27:Musical instrument part
476:Engineering the Guitar
427:steelguitaramerica.com
206:
194:
182:
170:
288:beneath the strings.
200:
188:
176:
169:
299:Fender Stratocaster
205:112 electric guitar
541:String instrument
421:Brenner, Patrick.
207:
195:
183:
171:
105:string instruments
45:possibly contains
577:
576:
564:Neck-through body
429:. Patrick Brenner
407:978-1-7341256-0-3
320:mortise and tenon
90:
89:
82:
47:original research
16:(Redirected from
602:
535:
528:
521:
512:
511:
489:
488:
471:
465:
464:
462:
460:
445:
439:
438:
436:
434:
418:
412:
411:
391:
85:
78:
74:
71:
65:
62:inline citations
38:
37:
30:
21:
610:
609:
605:
604:
603:
601:
600:
599:
580:
579:
578:
573:
545:
539:
498:
493:
492:
486:
472:
468:
458:
456:
446:
442:
432:
430:
419:
415:
408:
392:
388:
383:
366:
358:
324:string tension.
317:With a simpler
294:
282:
273:
264:
203:Yamaha Pacifica
164:
154:(Italian), and
133:mandolin family
97:
86:
75:
69:
66:
51:
39:
35:
28:
23:
22:
15:
12:
11:
5:
608:
598:
597:
592:
575:
574:
572:
571:
566:
561:
556:
550:
547:
546:
538:
537:
530:
523:
515:
509:
508:
497:
496:External links
494:
491:
490:
484:
466:
440:
413:
406:
385:
384:
382:
379:
378:
377:
372:
365:
362:
357:
354:
353:
352:
348:
341:
340:
329:
325:
315:
311:dovetail joint
293:
290:
281:
278:
272:
269:
263:
260:
163:
160:
88:
87:
42:
40:
33:
26:
9:
6:
4:
3:
2:
607:
596:
593:
591:
588:
587:
585:
570:
567:
565:
562:
560:
557:
555:
552:
551:
548:
544:
536:
531:
529:
524:
522:
517:
516:
513:
507:
503:
500:
499:
487:
485:9780387743691
481:
477:
470:
455:
451:
444:
428:
424:
417:
409:
403:
399:
398:
390:
386:
376:
373:
371:
368:
367:
361:
349:
346:
345:
344:
338:
334:
330:
326:
322:
321:
316:
313:
312:
307:
306:
305:
302:
300:
289:
287:
277:
268:
259:
255:
251:
248:
245:
242:
238:
236:
235:rock and roll
232:
228:
224:
220:
216:
212:
204:
199:
193:studio guitar
192:
187:
180:
175:
168:
159:
157:
153:
149:
144:
142:
138:
134:
130:
129:violin family
126:
122:
118:
114:
110:
106:
102:
95:
84:
81:
73:
70:November 2023
63:
59:
55:
49:
48:
43:This article
41:
32:
31:
19:
475:
469:
459:September 1,
457:. Retrieved
453:
443:
431:. Retrieved
426:
416:
396:
389:
370:Bolt-on neck
359:
342:
333:neck-through
318:
309:
303:
295:
283:
274:
265:
262:Steel guitar
256:
252:
249:
246:
239:
208:
179:Rickenbacker
155:
151:
147:
145:
100:
98:
76:
67:
44:
569:Set-through
543:neck joints
375:Set-in neck
328:instrument.
241:Marker dots
109:fingerboard
94:Neck (band)
18:Guitar neck
584:Categories
381:References
158:(German).
150:(French),
131:, and the
54:improve it
337:laminated
286:fretboard
227:truss rod
223:headstock
215:fretboard
141:saxophone
58:verifying
433:June 29,
364:See also
137:woodwind
121:ukuleles
554:Bolt-on
356:Profile
351:needed.
308:With a
113:Guitars
52:Please
559:Set-in
482:
404:
271:Violin
225:, and
219:tuners
191:Ibanez
181:guitar
162:Guitar
152:manico
148:manche
127:, the
117:banjos
331:With
231:blues
211:frets
125:lutes
480:ISBN
461:2017
435:2017
402:ISBN
280:Lute
156:Hals
101:neck
99:The
56:by
586::
452:.
425:.
221:,
217:,
213:,
143:.
123:,
119:,
115:,
534:e
527:t
520:v
463:.
437:.
410:.
96:.
83:)
77:(
72:)
68:(
50:.
20:)
Text is available under the Creative Commons Attribution-ShareAlike License. Additional terms may apply.