331:
122:
25:
165:, mechanically printed, or manually created image or pattern on transparent film. Alternatively, a lens may be used to project an image directly onto it. Typically, the photoresist is hardened where it receives sufficient exposure to light, but some photoresists are initially hard and are then softened by exposure. A
350:, which used photoresist to make a one-off camera photograph rather than a printing plate. His usual test subjects were paper prints of conventional engravings, and exposure was by contact under direct sunlight rather than by the use of a camera. Several metals were tried for the printing plate, as well as glass and
321:
effect is accomplished by photographing the subject through a wire or glass screen, which breaks the image up into a pattern of dots with sizes corresponding to the local brightness of the image; the larger dots create the darker areas, the smaller dots the highlights. The finer the screen, the finer
207:
and other decorative engravings. It can be used to make flat springs, levers, gears and other practical components that would otherwise be fabricated from sheet metal by cutting, drilling, jigsawing or stamping. A very high degree of precision is possible. In these applications, it is properly called
395:
is usually credited with the first commercially successful process that was compatible with ordinary letterpress printing, so that halftone blocks could be printed along with blocks of text in books, periodicals and newspapers. His process came into widespread use during the 1890s, largely replacing
388:
is usually credited with the first workable process for converting a grayscale image into a varying structure of stark black and white that resulted in a reasonably durable printing plate. As with other early halftone processes, the plate could not be combined with ordinary type, so for inclusion in
361:
as the photoresist. Initially soluble in various spirits and oils, a thin coating of bitumen hardens (polymerizes) where it is exposed to light. The unexposed parts can then be rinsed away with a solvent, baring the underlying material, which can then be etched to the desired depth. Niépce's process
144:
applied to the surface to be engraved to create a mask that protects some areas during a subsequent operation which etches, dissolves, or otherwise removes some or all of the material from the unshielded areas of a substrate. Normally applied to metal, it can also be used on glass, plastic and other
292:
dies and embossing dies. Decorative engravings made by this method may go through a second process to produce a decorative background. The raised parts and their shoulders are painted with an etchant-resistant material and a pattern of etchant-resistant material is applied to the deep parts of the
399:
As in many other fields of invention, there are conflicting claims of priority, instances of simultaneous invention, and variously nuanced definitions of the terminology, so sorting out the merits of the "first" claims made on behalf of the many inventors in the field of halftone reproduction—not
381:
process. The daguerreotype image consisted of a microscopically fine granular structure on the surface of a silver-plated copper sheet that had been polished to a mirror finish. Methods were soon devised for differentially etching the image grains and the ground so that the daguerreotype could be
316:
equivalents began to replace these methods in the 1970s. In the case of line cuts (graphics in solid blacks and whites without gradations of gray or color), the photoengraving is done on zinc, and the result is called a zinc etching. In the case of halftone cuts, the work is done on copper. The
293:
engraving. The resist for the background may be another photoengraving or may be randomly splashed on. The engraving is etched again for a short time to produce a raised pattern in the background. Decorative engravings of this type may also be spray-painted and sanded as in the previous method.
362:
lay dormant for many years, but it was revived in the 1850s and bitumen was widely used as a photoresist far into the 20th century. Very long exposures in bright light were required, but bitumen had the advantage that it was superbly resistant to strong acids.
382:
used as a printing plate. In some instances, very pleasing results were obtained, but exceptional skill and care were required and the very fine structure of the image limited the useful life of each plate to a few hundred prints at best.
169:
is used to wash away the soft parts, laying bare the underlying material, which is then bathed in or sprayed with the acid or other etchant. The remaining photoresist is usually removed after the operation is complete.
283:
oil is splashed onto it. As the acid etches the surface, the oil adheres to the edges of the exposed area. This progressively reduces the area being etched, resulting in a sloped edge; a single dot will end up as a
156:
to be used. It may be a liquid applied by brushing, spraying, pouring or other means and then allowed to set, or it may come in sheet form and be applied by laminating. It is then exposed to light—usually strong
173:
In the graphic arts, photoengraving is used to make printing plates for various printing processes, reproducing a wide variety of graphics such as lettering, line drawings and photographs.
354:. His first success came in 1822. The earliest known surviving example of a paper print made from one of his photoengraved plates dates to 1825 and reproduces a 17th-century engraving.
322:
the detail possible in the printed product. Halftones made with a screen having 65 lines to the inch are considered coarse. Those having 150 lines to the inch are considered fine.
516:
288:-shaped mound protruding from the etched area. This method is used for printing plates (the shoulder supports the printing surface),
442:
89:
61:
130:
212:, but the terms photochemical milling, chemical milling and photoetching are sometimes used. A similar process called
68:
108:
42:
389:
a book or periodical each image had to be printed separately and either bound in or tipped in with an adhesive.
75:
46:
57:
300:
is used to image the source material either directly onto the photosensitive coating, or onto a sheet of
297:
464:"Notice bibliographique: Cheval avec son conducteur Image fixe : photographie / Nicéphore Niépce"
196:
330:
267:
Another method produces a deep engraving with sloped shoulders. In this method, the metal (usually
305:
209:
35:
351:
233:
396:
the hand-engraved wood and metal blocks that had previously served to provide illustrations.
347:
335:
185:
82:
392:
204:
8:
463:
434:
248:. The process can be done in open trays but is much more effective if the etchant (often
217:
192:
475:
236:
printing plates or for decorative purposes. It is also the same method used for printed
511:
494:
249:
301:
338:
in 1825. It reproduces a 17th-century
Flemish engraving. Niépce called the process "
471:
385:
358:
213:
153:
313:
285:
253:
178:
121:
260:
can be used in the etching equipment. Decorative engraving is often filled by
505:
374:
309:
289:
237:
409:
312:
onto the coated plate. In large-scale commercial printing, computer-driven
189:
174:
125:
A print made in 1907 from a photoengraved plate. It reproduces a sketch of
400:
infrequently biased by nationalistic sentiments—can be very problematic.
378:
339:
276:
264:
then sanding to remove the paint from the raised parts of the engraving.
261:
158:
141:
495:
Containing
Practical Instructions for Producing Photoengraved Plates...
162:
370:
272:
200:
24:
366:
318:
257:
228:
One method of photoengraving produces a shallow depression in the
166:
373:
photographic images dates back to the 1839 introduction of the
346:
The first photoengraving process was developed in the 1820s by
241:
148:
A photoresist is selected which is resistant to the particular
245:
229:
126:
334:
The oldest known print made from a photoengraved plate, by
280:
268:
149:
492:
Harry
Jenkins, Stephen H. Horgan, Frederic Eugene Ives,
517:
Photographic processes dating from the 19th century
441:. France. Niépce and the Invention of Photography.
296:
In traditional print shop practice, a special very-
49:. Unsourced material may be challenged and removed.
256:is used as the etchant, no metal parts other than
503:
429:
427:
425:
456:
422:
435:"1819-1824 — Invention of photoengraving"
140:is a process that uses a light-sensitive
109:Learn how and when to remove this message
329:
120:
504:
275:) is held face down and a mixture of
369:process that could be used to print
47:adding citations to reliable sources
18:
240:. The engraving is usually made in
184:The same procedure is used to make
13:
486:
252:) is sprayed onto the metal. When
14:
528:
468:Bibliothèque nationale de France
365:The use of photoengraving for a
23:
445:from the original on 2021-05-02
34:needs additional citations for
199:dies. It is also used to make
181:are examples of such process.
1:
439:Nicéphore Niépce House Museum
415:
7:
403:
10:
533:
325:
223:
16:Type of engraving process
210:photochemical machining
377:, the first practical
343:
186:printed circuit boards
134:
333:
205:commemorative plaques
161:(UV) light—through a
124:
43:improve this article
298:large-format camera
232:. This is used for
218:integrated circuits
352:lithographic stone
344:
135:
129:'s castle made by
302:photographic film
119:
118:
111:
93:
524:
480:
479:
460:
454:
453:
451:
450:
431:
393:Frederic E. Ives
386:Henry Fox Talbot
359:Bitumen of Judea
348:Nicéphore Niépce
336:Nicéphore Niépce
216:is used to make
214:photolithography
154:etching compound
114:
107:
103:
100:
94:
92:
58:"Photoengraving"
51:
27:
19:
532:
531:
527:
526:
525:
523:
522:
521:
502:
501:
498:, Chicago 1902.
489:
487:Further reading
484:
483:
462:
461:
457:
448:
446:
433:
432:
423:
418:
406:
328:
310:contact-printed
254:ferric chloride
250:ferric chloride
226:
179:screen printing
131:Ludwig Salvator
115:
104:
98:
95:
52:
50:
40:
28:
17:
12:
11:
5:
530:
520:
519:
514:
500:
499:
488:
485:
482:
481:
455:
420:
419:
417:
414:
413:
412:
405:
402:
327:
324:
314:optoelectronic
304:which is then
262:spray-painting
238:circuit boards
225:
222:
138:Photoengraving
117:
116:
31:
29:
22:
15:
9:
6:
4:
3:
2:
529:
518:
515:
513:
510:
509:
507:
497:
496:
491:
490:
477:
473:
469:
465:
459:
444:
440:
436:
430:
428:
426:
421:
411:
408:
407:
401:
397:
394:
390:
387:
383:
380:
376:
375:daguerreotype
372:
368:
363:
360:
355:
353:
349:
341:
337:
332:
323:
320:
315:
311:
307:
303:
299:
294:
291:
290:foil stamping
287:
282:
278:
274:
270:
265:
263:
259:
255:
251:
247:
243:
239:
235:
231:
221:
219:
215:
211:
206:
202:
198:
194:
191:
190:foil-stamping
187:
182:
180:
176:
171:
168:
164:
160:
155:
151:
146:
143:
139:
132:
128:
123:
113:
110:
102:
91:
88:
84:
81:
77:
74:
70:
67:
63:
60: –
59:
55:
54:Find sources:
48:
44:
38:
37:
32:This article
30:
26:
21:
20:
493:
467:
458:
447:. Retrieved
438:
410:Photogravure
398:
391:
384:
379:photographic
364:
357:Niépce used
356:
345:
295:
266:
227:
183:
175:Photogravure
172:
163:photographic
147:
137:
136:
105:
96:
86:
79:
72:
65:
53:
41:Please help
36:verification
33:
340:Heliography
277:nitric acid
159:ultraviolet
145:materials.
142:photoresist
506:Categories
449:2021-06-30
416:References
201:nameplates
99:April 2009
69:newspapers
512:Engraving
476:42708962x
371:grayscale
306:developed
281:soap-like
273:magnesium
197:embossing
152:or other
470:. 1825.
443:Archived
404:See also
367:halftone
319:halftone
258:titanium
234:intaglio
326:History
224:Methods
167:solvent
83:scholar
474:
279:and a
242:copper
85:
78:
71:
64:
56:
246:brass
230:metal
127:Parga
90:JSTOR
76:books
308:and
286:cone
269:zinc
195:and
193:dies
177:and
150:acid
62:news
472:BnF
271:or
244:or
45:by
508::
466:.
437:.
424:^
342:".
220:.
203:,
188:,
478:.
452:.
133:.
112:)
106:(
101:)
97:(
87:·
80:·
73:·
66:·
39:.
Text is available under the Creative Commons Attribution-ShareAlike License. Additional terms may apply.
