323:
the modal unbinding occurs. Experimentally, one plots the transmitted power from a wrapped fibre into which a uniform modal power distribution has been excited, as a function of mandrel diameter, maintaining a constant number of turns. This reveals step-like reductions in transmitted power as the diameter decreases, where each step is the point at which the mandrel is beginning to affect the next-lower mode group. For best measurement reproducibility, one would select a diameter that is not near such a transition, although this may not be possible if measurements must be performed over a range of wavelengths. Total mode volume in a fiber is a function of wavelength, so the mandrel diameter at which the mode group transitions occur will change with wavelength.
63:
133:
22:
353:
314:
guided as to be released into an unbound state, absorbed by the fibre coating or completely ejected from the fibre. The practical effect of mandrel wrapping is to attenuate optical power propagating in the highest-order modes. Lower-order modes are unaffected, experiencing neither increased loss nor conversion into other modes (mode mixing).
322:
The mandrel diameter and number of turns are chosen to eliminate certain modes in a reproducible way. It is empirically observed that more than 5 full 360-degree wraps creates little additional loss, so 3 to 5 turns are commonly specified. The mandrel diameter affects how far into the mode volume
313:
The effect of physically bending an optical fibre around a cylindrical form is to slightly modify the effective refractive index in the curved region, which locally reduces the effective mode volume of the fibre. This causes optical power in the highest order modes to become unguided, or so weakly
292:
In multimode fibre, mandrel wrapping is used to eliminate the effect of "transient loss", the tendency of high-order modes to experience higher loss than lower-order modes. Numerical addition (in decibels) of the measured loss of multiple fibre segments and/or components overestimates the loss of
296:
In single-mode optical fibre measurements, it is used to enforce true single-mode propagation at wavelengths near or below the theoretical cutoff wavelength, at which substantial power can exist in a higher-order mode group. In this use, it is commonly termed a
304:
Ultimately, the effect of mandrel wrapping on optical measurements depends on the propagating mode power distribution. An additional loss mechanism has no effect unless power is present in the affected modes.
276:
performance tests, to create a defined mode power distribution or to prevent multimode propagation in single mode fibre. If the launch fibre is fully filled ahead of the mandrel wrap, the higher-order
357:
257:
is a technique used to preferentially attenuate high-order mode power of a propagating optical signal. Consequently, if the fibre is propagating substantial energy in affected modes, the
281:
will be stripped off, leaving only lower-order modes. If the launch fibre is underfilled, for example as a consequence of being energized by a
92:
197:
362:
169:
272:
of specified size, depending on the fibre characteristics and the desired modal distribution. It has application in optical
176:
273:
234:
216:
150:
114:
49:
35:
85:
183:
368:
154:
165:
293:
the concatenated set if each segment or component has been measured with a full mode power distribution.
75:
79:
71:
143:
96:
190:
389:
41:
8:
258:
344:
372:
278:
332:
289:, there will be no effect on the mode power distribution or loss measurements.
383:
250:
282:
317:
132:
269:
286:
345:
Fluke
Networks: Using Mandrels for Testing Multimode Fiber
318:
Determination of appropriate mandrel wrap conditions
268:consists of a specified number turns of fibre on a
157:. Unsourced material may be challenged and removed.
381:
84:but its sources remain unclear because it lacks
50:Learn how and when to remove these messages
308:
235:Learn how and when to remove this message
217:Learn how and when to remove this message
115:Learn how and when to remove this message
382:
155:adding citations to reliable sources
126:
56:
15:
13:
14:
401:
338:
31:This article has multiple issues.
356: This article incorporates
351:
131:
61:
20:
369:General Services Administration
142:needs additional citations for
39:or discuss these issues on the
1:
7:
326:
10:
406:
70:This article includes a
99:more precise citations.
364:Federal Standard 1037C
358:public domain material
309:Principle of operation
299:High Order Mode Filter
266:cylindrical rod wrap
151:improve this article
259:modal distribution
166:"Mandrel wrapping"
72:list of references
287:edge-emitting LED
261:will be changed.
245:
244:
237:
227:
226:
219:
201:
125:
124:
117:
54:
397:
377:
376:
371:. Archived from
355:
354:
255:mandrel wrapping
240:
233:
222:
215:
211:
208:
202:
200:
159:
135:
127:
120:
113:
109:
106:
100:
95:this article by
86:inline citations
65:
64:
57:
46:
24:
23:
16:
405:
404:
400:
399:
398:
396:
395:
394:
380:
379:
361:
352:
350:
341:
329:
320:
311:
241:
230:
229:
228:
223:
212:
206:
203:
160:
158:
148:
136:
121:
110:
104:
101:
90:
76:related reading
66:
62:
25:
21:
12:
11:
5:
403:
393:
392:
375:on 2022-01-22.
348:
347:
340:
339:External links
337:
336:
335:
333:Mode scrambler
328:
325:
319:
316:
310:
307:
243:
242:
225:
224:
139:
137:
130:
123:
122:
80:external links
69:
67:
60:
55:
29:
28:
26:
19:
9:
6:
4:
3:
2:
402:
391:
388:
387:
385:
378:
374:
370:
366:
365:
359:
346:
343:
342:
334:
331:
330:
324:
315:
306:
302:
300:
294:
290:
288:
284:
280:
275:
271:
267:
262:
260:
256:
252:
249:In multimode
247:
239:
236:
221:
218:
210:
207:November 2013
199:
196:
192:
189:
185:
182:
178:
175:
171:
168: –
167:
163:
162:Find sources:
156:
152:
146:
145:
140:This article
138:
134:
129:
128:
119:
116:
108:
105:November 2013
98:
94:
88:
87:
81:
77:
73:
68:
59:
58:
53:
51:
44:
43:
38:
37:
32:
27:
18:
17:
390:Fiber optics
373:the original
363:
349:
321:
312:
303:
298:
295:
291:
274:transmission
265:
263:
254:
251:fibre optics
248:
246:
231:
213:
204:
194:
187:
180:
173:
161:
149:Please help
144:verification
141:
111:
102:
91:Please help
83:
47:
40:
34:
33:Please help
30:
283:laser diode
97:introducing
177:newspapers
36:improve it
42:talk page
384:Category
327:See also
301:(HOMF).
270:mandrel
191:scholar
93:improve
193:
186:
179:
172:
164:
360:from
279:modes
198:JSTOR
184:books
78:, or
170:news
285:or
153:by
386::
367:.
264:A
253:,
82:,
74:,
45:.
238:)
232:(
220:)
214:(
209:)
205:(
195:·
188:·
181:·
174:·
147:.
118:)
112:(
107:)
103:(
89:.
52:)
48:(
Text is available under the Creative Commons Attribution-ShareAlike License. Additional terms may apply.