25:
130:
164:
Compared to a "normal" ball bearing the rings are quite wide and usually have holes drilled in them to provide fixation to a structure. Seals can be provided between the rings to protect the rolling elements. Compared to other rolling-element bearings, slewing bearings are relatively thin section and
176:
Slewing bearing designs range from single row ball or roller style, through double row ball or roller, triple row roller, combined (1 roller/ 1 ball) or wore guided raceways - each design having its own special characteristics and application. Old designs can have split rings to allow tight control
172:
are 4 meters diameter and fit over a 3.5 meter axle. Slewing bearings are often made with gear teeth integral with the inner or outer race (or both in rare cases) used to drive the platform relative to the base (for example in winches).
168:
Slewing rings range in size from as little as 100mm diameter to well over 15 000mm (often segmented at this size for easy transport and handling); for example the bearings on the
149:
that typically supports a heavy but slow-turning or slowly-oscillating loads in combination (axial, radial and moment loads), often a horizontal platform such as a conventional
196:
Most manufacturers of slewing rings have their own set of manufacturing standards but the
American Society of Mechanical Engineers (ASME) publishes the following Standard:
161:. In other orientations (e.g. a horizontal axis of rotation) they are used in materials handling grapples, forklift attachments, welding turnover jigs and so on.
165:
require that the structure to which they are bolted is stiff enough so that under load predefined limits of distortion are not exceeded.
97:
69:
76:
116:
54:
46:
83:
213:
50:
180:
As for other bearings that reciprocate, rather than rotating continuously, lubrication can be difficult. The
65:
184:
built up in a continuously rotating bearing is disrupted by the stop start motion of slewing. Instead, a
35:
146:
39:
200:
ASME SRB-1 on Design, Installation, Maintenance, and
Application of Ball Slewing Ring Bearings
90:
8:
185:
150:
207:
169:
154:
181:
24:
158:
129:
157:, or the wind-facing platform of a horizontal-axis (yaw)
16:
Rotational support element for directional alignment
145:(also called a turntable bearing) is a rotational
205:
53:. Unsourced material may be challenged and
117:Learn how and when to remove this message
128:
206:
51:adding citations to reliable sources
18:
13:
188:with pumped oil flow may be used.
14:
225:
23:
1:
191:
177:on preload during assembly.
7:
10:
230:
147:rolling-element bearing
134:
214:Bearings (mechanical)
132:
47:improve this article
186:hydrostatic bearing
135:
133:Slew ring bearing
127:
126:
119:
101:
66:"Slewing bearing"
221:
122:
115:
111:
108:
102:
100:
59:
27:
19:
229:
228:
224:
223:
222:
220:
219:
218:
204:
203:
194:
139:slewing bearing
123:
112:
106:
103:
60:
58:
44:
28:
17:
12:
11:
5:
227:
217:
216:
202:
201:
193:
190:
125:
124:
31:
29:
22:
15:
9:
6:
4:
3:
2:
226:
215:
212:
211:
209:
199:
198:
197:
189:
187:
183:
178:
174:
171:
170:Falkirk Wheel
166:
162:
160:
156:
152:
148:
144:
140:
131:
121:
118:
110:
99:
96:
92:
89:
85:
82:
78:
75:
71:
68: –
67:
63:
62:Find sources:
56:
52:
48:
42:
41:
37:
32:This article
30:
26:
21:
20:
195:
179:
175:
167:
163:
155:swing yarder
142:
138:
136:
113:
107:January 2016
104:
94:
87:
80:
73:
61:
45:Please help
33:
77:newspapers
192:Standards
182:oil wedge
143:slew ring
34:does not
208:Category
159:windmill
91:scholar
55:removed
40:sources
93:
86:
79:
72:
64:
151:crane
98:JSTOR
84:books
153:, a
70:news
38:any
36:cite
141:or
49:by
210::
137:A
120:)
114:(
109:)
105:(
95:·
88:·
81:·
74:·
57:.
43:.
Text is available under the Creative Commons Attribution-ShareAlike License. Additional terms may apply.